Remote Particle Sensor – Models 3718-A & 3719-A
Remote particle sensors with analog output & 2-channel remote particle sensors for facility monitoring applications.
Kanomax Remote Particle Sensors with analog output are designed to fit into your existing monitoring system, or they can be used as a stand-alone unit to monitor a critical area when connected to an alarm or controller.
With two models available, these 2-channel remote particle sensors are capable of Modbus communication via RS485 interface. 0.1 cfm and 1.0 cfm flow rate models are available, along with flexible 4-20mA analog output with the 1.0 cfm unit (only).
These particle sensors output particle counts, error statuses and alarm signals, and are able to connect to a PLC or data logger for facility monitoring applications.
They can be easily added to a process or building automation system. Fully compliant with ISO21501-4 calibration standard and JIS B9921.
Remote particle sensors with analog output & 2-channel remote particle sensors for facility monitoring applications.
Kanomax Remote Particle Sensors with analog output are designed to fit into your existing monitoring system, or they can be used as a stand-alone unit to monitor a critical area when connected to an alarm or controller.
With two models available, these 2-channel remote particle sensors are capable of Modbus communication via RS485 interface. 0.1 cfm and 1.0 cfm flow rate models are available, along with flexible 4-20mA analog output with the 1.0 cfm unit (only).
These particle sensors output particle counts, error statuses and alarm signals, and are able to connect to a PLC or data logger for facility monitoring applications.
They can be easily added to a process or building automation system. Fully compliant with ISO21501-4 calibration standard and JIS B9921.
Features and Benefits of Remote Particle Sensor 3718-A & 3719-A
- 2-channel particle sensor with Modbus communication via RS485 interface
- Flexible 4-20mA analog output (1.0 cfm unit only)
- 0.1 cfm and 1.0 cfm flow rates are available
- Outputs particle counts, error status and alarm signal
- Able to connect to a PLC or data logger for facility monitoring applications
- Can be added to a process or building automation system
- Fully compliant with ISO21501-4 calibration standard and JIS B9921
- Configuration software is included for easy user parameter setup
- Power can be provided via a network connection or AC adaptor
- Stainless steel housing
Application of Remote Particle Sensor 3718-A & 3719-A
- Facility particle monitoring
- Hospital surgical room
- Cleanroom monitoring
- Building monitoring systems
Accessories of Remote Particle Sensor 3718-A & 3719-A
- Filter
- Tygon tube
- Setting softeware (DVD)
- AC adapter
- Inspection manual
- Calibration certificate
Specification of Remote Particle Sensor 3718-A & 3719-A
| Specifications | |||
|---|---|---|---|
|
Model
|
3718-A
|
3719-A
|
|
|
Particle Size Distribution
|
0.3 µm, 0.5 µm
|
0.5 µm, 5.0 µm
|
|
|
Rated Flow
|
28.3 L/min (1 CFM)
|
||
|
Optical Source
|
Laser Diode
|
||
|
Counting Efficiency
|
Compliant with ISO 21501-4, JIS B 9921
|
||
|
Max Detectable Concentration
|
500.000 CNT/ft3
|
||
|
Setting Parameter
|
Sampling Time: 1 to 60 seconds
|
||
|
Output Range Setting (to be configures for each particle size) |
|||
|
Alarm Setting: 0% – 100%
|
|||
|
Address Setting: 0 – 512
|
|||
|
Error Output Setting: ON/OFF
|
|||
|
Sampling Pump
|
External Vacuum >51 kPa
|
||
|
Interface
|
RS 485, Analog Output (4-20 mA)
|
||
|
Communication
|
RS 485
|
||
|
Setting Software
|
Japanese, English
|
||
|
Power Supply
|
1. DC Power Supply: DC 9V – 28 |
||
|
Operating Environment
|
10-30 °C, 20-85% RH (Non-condensing)
|
||
|
Storing Environment
|
Temperature: -10 to 50 °C, Humidity: 95% RH or less (non-condensing)
|
||
|
Dimension
|
133 mm (W) x 95 mm (D) x 80 mm (H)
|
||
|
Weight
|
1,0 kg
|
||
Standard Accessories of Remote Particle Sensor 3718-A & 3719-A
- User’s Manual (English) (1),
- User’s Manual (Japanese) (1),
- AC adapter (1),
- Zero Filter (1), Adapter 1 (1),
- Tygon Tube 1 (1),
- Setting Software DVD – 3718/19-40 (1)
Optional Accessories of Remote Particle Sensor 3718-A & 3719-A
- USB-RS 485 Converter 3716A-20 (Converter + Converter Connecting Cable),
- Converter Connecting Cable 3716A-21,
- RS 232c – RS485 Converter 3716A-22 (Converter + Converter Connecting Cable),
- Isokinetic Probe-3905-07 (1),
- Isokinetic Probe 3718-01 (1),
- Tygon Tube 1 (1),
- Tygon Tube 2 (1)
