EBI 12-T222 Temperature Data Logger for Routine Checks

For final inspection after the repair, but also for validation.

This logger is to be placed in machines for measurement.

The temperature data logger is used for thermal measurement during validation, but also for routine checks and the final test after maintenance has been carried out.

Benefits :

fast response time
wireless measurement
versatile

Applications :

Validation logger for temperature measurement in the steam sterilizer, washer disinfector and endoscope washer
A0 Value calculation
F0 Value calculation
Qualification of warehouses and refrigeration equipment

For final inspection after the repair, but also for validation.

This logger is to be placed in machines for measurement.

The temperature data logger is used for thermal measurement during validation, but also for routine checks and the final test after maintenance has been carried out.

Benefits :

fast response time
wireless measurement
versatile

Applications :

Validation logger for temperature measurement in the steam sterilizer, washer disinfector and endoscope washer
A0 Value calculation
F0 Value calculation
Qualification of warehouses and refrigeration equipment

Technical Data of EBI 12-T222

Specification Information
Data memory	27,840 measurement values
Sensor	Pt 1,000, class A, 1 external temperature probe, Ø 1.5 mm Radial arranged, Needle length = 40 mm, rigid, M5 thread
Weight	approx. 110 g
Accuracy	± 0,5°C (-55 °C … -40 °C) ± 0,2°C (-40 °C … 0 °C) ± 0,1 °C (0 °C ... +120 °C) ± 0,1 °C (+140 °C … +150 °C)
Protection class	IP68
Dimensions	(Ø x H) 48 mm x 24 mm - Needle length 40 mm
Resolution	0,01 °C
Certificate	Factory Calibration: -20 °C, 0 °C, +60 °C and +134 °C
Measured variables	Temperature
Interval	1 s ... 24 h
Battery	Lithium battery (3,6 V), user replaceable
Measuring range	-55 °C ... +140 °C
Storage temperature	-20 °C ... +70 °C

Software / Interface

Winlog.pro Software

Enables real-time monitoring with wireless data loggers
Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc.
Display oft the timeline either absolute or relative
Customized definition of individual areas possible (with their
own statistics and calculations)
Including calibration tool for data loggers
Integration of pictures and graphics into reports possible
IQ/OQ documentation to qualify the system is available

Winlog.validation Software for routine control and validation

Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.

The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.

The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.

TÜV certified
User-friendly – DIN EN ISO 9241-110:2008 conform
Central user administration in local area network possible
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for specific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible
FDA 21 CFR Part 11
DIN ISO/IEC 25051:2014
Incl. IQ- / OQ-Documentation for software Qualification
Automatic evaluation of validation processes