EBI 12-TC230 Temperature / Conductivity Data Logger for Measuring in Washer Disinfector

Measurement without machine interruption.

In the reprocessing of medical devices, the regular measurement of conductivity during the cleaning and disinfection process is very important.

The conductivity of the final rinse water is an indicator of the quality of the cleaning performance.

With this data logger, measurement is possible without interrupting the washer disinfector program run.

We recommend using the logger in combination with the AL 132 flow adapter, which is available as an accessory.

Benefits :

large measuring range
robust data logger
sterilizable data logger

Applications :

Measurement of conductivity at the end of disinfection

Measurement without machine interruption.

In the reprocessing of medical devices, the regular measurement of conductivity during the cleaning and disinfection process is very important.

The conductivity of the final rinse water is an indicator of the quality of the cleaning performance.

With this data logger, measurement is possible without interrupting the washer disinfector program run.

We recommend using the logger in combination with the AL 132 flow adapter, which is available as an accessory.

Benefits :

large measuring range
robust data logger
sterilizable data logger

Applications :

Measurement of conductivity at the end of disinfection

Technical Data of EBI 12-TC230

Specification Information
Data memory	2 x 50,160 measurement values
Accuracy	Temperature : ± 0,2 °C Conductivity : ± 0,5 µS (1 µS/cm .. 20 µS/cm) ± 1,0 µS (20,1 µS/cm .. 100 µS/cm) ± 3% measurement values (100,1µS/cm .. 1500µS/cm) ± 5% ( (for the remaining measuring range)
Protection class	IP68
Dimensions	(Ø x H) 48 mm x 130 mm
Resolution	0,01 °C 0,1 µS/cm
Certificate	Factory Calibration : 0 °C, +60 °C and +121 °C 5.0 µS/cm, 100.0 µS/cm and 1,413.0 µS/cm
Measured variables	Temperature, Conductivity
Battery	Lithium battery (3,6 V), user replaceable
Measuring range	0 °C ... +125 °C, 1 µS/cm .. 2000 µS/cm
Storage temperature	0 °C ... +125 °C

Software / Interface

Winlog.pro Software

Enables real-time monitoring with wireless data loggers
Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc.
Display oft the timeline either absolute or relative
Customized definition of individual areas possible (with their
own statistics and calculations)
Including calibration tool for data loggers
Integration of pictures and graphics into reports possible
IQ/OQ documentation to qualify the system is available

Winlog.validation Software for routine control and validation

Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.

The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.

The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.

TÜV certified
User-friendly – DIN EN ISO 9241-110:2008 conform
Central user administration in local area network possible
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for specific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible
FDA 21 CFR Part 11
DIN ISO/IEC 25051:2014
Incl. IQ- / OQ-Documentation for software Qualification
Automatic evaluation of validation processes