EBI 12-TH100-EX Temperature / Humidity Data Logger for Measuring in Ethylene Oxide Sterilizer
Humidity sensor easy to change
This data logger is for measuring the relative humidity during processing with ethylene oxide. It can be used in hazardous areas.
Benefits :
- high accuracy
- robust data logger
Applications :
- Sterilization with ethylene oxide gas (EO)
Humidity sensor easy to change
This data logger is for measuring the relative humidity during processing with ethylene oxide. It can be used in hazardous areas.
Benefits :
- high accuracy
- robust data logger
Applications :
- Sterilization with ethylene oxide gas (EO)
Technical Data of EBI 12-TH100-EX
| Specification Information | |
|---|---|
|
Data memory |
2 x 50,160 measurement values |
|
Weight |
approx. 120 g |
|
Accuracy |
± 0,1 °C |
|
Protection class |
IP52 |
|
Dimensions |
ø 48 mm x 70 mm |
|
Resolution |
0,01 °C |
|
Certificate |
Factory Calibration: |
|
Measured variables |
Temperature, humidity |
|
Interval |
1 s ... 24 hours |
|
Battery |
Lithium battery (3,6 V), user replaceable |
|
Measuring range |
Temperature: -20 °C ... +85 °C |
|
Storage temperature |
-20 °C ... +70 °C |
Software / Interface
Winlog.pro Software
- Enables real-time monitoring with wireless data loggers
- Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc. - Display oft the timeline either absolute or relative
- Customized definition of individual areas possible (with their
own statistics and calculations) - Including calibration tool for data loggers
- Integration of pictures and graphics into reports possible
- IQ/OQ documentation to qualify the system is available
Winlog.validation Software for routine control and validation
Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.
The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.
The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.
- TÜV certified
- User-friendly – DIN EN ISO 9241-110:2008 conform
- Central user administration in local area network possible
- Automatic report generation
- Automatic user-defined calculations
- Automatic identification of process cycles
- Creation of user-defined masters for specific devices and
thermal processes - Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible - FDA 21 CFR Part 11
- DIN ISO/IEC 25051:2014
- Incl. IQ- / OQ-Documentation for software Qualification
- Automatic evaluation of validation processes
Interface Set SI 1300
- USB-connector
- Colored LED signals programming,
readout and faulty execution - Including Antenna AL 111
- Software Winlog.pro
Interface Set SI 1100
- USB-connector
- Colored LED signals programming,
readout and faulty execution - Software Winlog.pro
Accessories
AL 112 for IF 200 Steri-Antenne
- Developed for real time monitoring
- AL 112 is a cable with 3 m length
- Antenna placement in the field of the door seal of a sterilizer or washer disinfector
- Antenna steam-tight
- It is possible by a sealing to introduce it in the chamber
AL 175 TH Exchange sensor
AL 175 TH Exchange sensor for EBI 12-TH100-EX
Video Information
More Information
Get more information and English manual for this Temperature Data Logger here!
