Titronic® 500 – Piston Burettes for All Purposes

Motor driven piston burette for exchangeable heads for dosing and titration.

The TITRONIC® 500 is the ideal piston burette for manual titrations, accurate dosing applications as well as the preparation of solutions. When used with TitriSoft 3.5, it acts as a titration burette or with the TitroLine ®7000 and TitriSoft 3.5, it is an automatic dosing unit perfect to pre-dose a titrant.

Motor driven piston burette for exchangeable heads for dosing and titration.

Manual Titration

While the automatic titration is gaining ground, manual titration remains one of the cost-effective standard applications in the lab. Everywhere high precision and flexibility are required, a piston burette with an interchangeable dosing module is the best choice.

Titration using the manual controller dosing buttons.
Titration rate can be adjusted to optimize titration speed and accuracy.
Programmable automatic calculations, printer ready.
Automatic weight recording when balance is connected.

Dosing

Besides titration, there are various routine dosing tasks that must be performed in the lab.

Control dosing using the manual controller and the dedicated keypad.
Adjustable dosing and filling rates optimize speed and accuracy.
Store dosing methods with different parameters.

Solutions preparation

A special sample preparation mode is available on the TITRONIC 500 where reagent is dosed into a sample until the required concentration is reached. The sample is weighed, the dosing volume is determined. The volume can then be automatically added to the sample. This mode is used for e.g., preparing standard and sample solutions for viscometry.

Adjustable dosing and filling speed.
Dosing volume is automatically calculated without additional PC software.
Several methods with different parameters can be stored.
Automatic weight recording when balance is connected.

General features

High visibility, full color display that can be easily viewed from a distance and at extreme angles.
Reagent data is securely stored in the intelligent and interchangeable modules.
Includes up to three USB, one LAN and two RS232 ports for expansion and connection of devices.
Export the results as PDF or CSV, also to networks.
User management / password

Benefits Titronic 500

Brilliant TFT display with a wide viewing angle
Inteliigent interchangeable modules with 5, 10, 20, and 50 ml volume capacity
Connect to a printer and/or an analytical balance
Remote control access via RS 232 or USB interface
Connect up to 16 devices using one USB or RS 232 of a PC with the two integrated RS 232 interfaces (Daisy Chain)

Scope of delivery:
Basic unit without magnetic stirrer and without exchangeable head, with keyboard, hand controller, stand rod and titration clamp Z 305, power supply 100-240 V.

Scope of delivery:
Basic unit with magnetic stirrer, without exchangeable head, with keyboard, hand controller, stand rod and titration clamp Z 305, power supply 100-240 V.

Specific features for the TITRONIC® 500

Manual titration with the hand controller (mouse)
Titration rate can be adjusted to optimize titration speed and accuracy
Programmable automatic calculations with individual units
Dosing with adjustable dosing and filling rates for optimize speed and accuracy.
Sample/solution preparation
Automatic weight recording when balance is connected

Scope of delivery:
Basic unit with magnetic stirrer, with 20 ml exchangeable head, with keyboard, hand controller, stand rod and titration clamp Z 305, power supply 100-240 V.

Specifications TITRONIC® 500

TITRONIC® 500
Interfaces:	3 × USB (2 x USB-A and 1 × USB-B), 2 × RS-232-C and 1 x LAN
Interchangeable burettes	5, 10, 20 ml or 50 ml intelligent interchangeable burette units
Resolution (Steps):	20.000 steps
Dosing accuracy:	according to DIN ISO 8655, part 3: accuracy: < 0.15 % precision: < 0.05 - 0.07 % (in dependence of the used burette size)
Display	3.5 inches - 1/4 VGA TFT graphic color display with 320 x 240 pixels
Housing material	Polypropylene
Dimensions	15.3 x 45 x 29.6 cm (W x H x D), height with interchangeable head
Front keyboard	Polyester coated
Material interchangeable burettes Valve:	PTFE/ETFE; Cylinder: borosilikate glass 3.3 (DURAN®) hoses (FEP, blue)
Weight	2.3 kg for basic device, 3.5 kg für complete device with interchangeable head (with empty reagent bottle)
Ambient conditions	Ambient temperature: + 10 ... + 40 °C for operation and storage Humidity according to EN 61 010, Part 1: max. relative humidity 80 % for temperatures up to 31 °C, linear decrease down to 50 % relative humidity at a temperature of 40 °C
Power supply:	100-240 V; 50/60 Hz, power input: 30 VA
CE-sign:	EMC compatibility according to the Council Directive: 2004/108/EG; applied harmonized standards: EN 61326-1:2006 Low-voltage directive according to the Council Directive 2006/95/EG Testing basis EN 61 010, Part 1
Magnetic stirrer	TM 235, with Power supply TZ 1855, for vessels up to 500 ml, agitator speed infinitely adjustable from 500 - 2000 r/min, for the connection to TitroLine® 7XXX and TITRONIC® 500

Ordering Information TITRONIC® 500

Type No.	Order No.	Description
T 500	285220200	TITRONIC® 500 basic unit without magnetic stirrer, with stand rod and titration clamp Z 305, controller TZ 3880, power supply 100-240 V
T 500-M1	285220210	TITRONIC® 500 basic unit with magnetic stirrer TM 235, with stand rod TZ 1510, electrode clamp Z 305, hand controller TZ 3880, power supply 100-240 V
T 500-M2/20	285220220	TITRONIC® 500 basic unit with magnetic stirrer TM 235 and 20 ml exchange unit WA 20, with stand rod TZ 1510, electrode clamp Z 305, hand controller TZ 3880, power supply 100-240 V

Accessories for TITRONIC® 500

Type No.	Order No.	Description
WA 05	285220300	5 ml exchangeable unit with integrated chip for reagent data, with brown glass bottle for titrant, GL 45 and S 40-bottle adapter, tubes, drip tube and titration tip
WA 10	285220310	10 ml exchangeable unit with integrated chip for reagent data, with brown glass bottle for titrant, GL 45 and S 40-bottle adapter, tubes, drip tube and titration tip
WA 20	285220320	20 ml exchangeable unit with integrated chip for reagent data, with brown glass bottle for titrant, GL 45 and S 40-bottle adapter, tubes, drip tube and titration tip
WA 50	285220350	50 ml exchangeable unit with integrated chip for reagent data, with brown glass bottle for titrant, GL 45 and S 40-bottle adapter, tubes, drip tube and titration tip
TM 235, 115-230 V	285220400	Magnetic stirrer for vessels up to 500 ml, agitator speed infinitely adjustable from 500 - 2000 rpm, for the connection to TitroLine® 6000/7000 and TITRONIC® 500
TM 235 KF, 115-230 V	285220900	Titriation stand with pump; Scope of delivery: Basic unit with 1 l DURAN ®-reagent bottle TZ 1791, 1 l DURAN®-waste bottle TZ 1792, moisture bottle, tubes and screw threads, power supply TZ 1855 (110 to 240 V)
TZ 1052	285214721	KF-drying stove, 230 V
TZ 1055	285215183	KF-drying stove, 115 V
TZ 1060	285218115	Accessories set for KF drying stove TZ 1052/TZ1055
TZ 1065	285201973	Flowmeter with valve and hose connectors for gas volumes (air, nitrogen) from 50 - 500 ml/min
KF 1100	285102030	Micro double platinum electrode for Karl Fischer titrations, with fixed cable, double platinum pin and tapper NS 7.5 for TZ 1770 and TZ 1772
TZ 1748	285216560	Stand rod stainless steel Ø 10 mm
TZ 1770	285216677	Karl Fischer titration vessel. DURAN® glass vessel TZ 1775 (approx. 30...150 ml), removable head made of polypropylene/PTFE, 1 drilling NS 19, NS 14,5, NS 7,5 and 3 drillings with screw threads, titration tip, moisture trap and weighing funnel
TZ 1789	285221120	Starter kit KF consisting of molecular sieve, needles with syringes and glass wool
TZ 3863	285220480	USB-thermo printer, 112 mm for TitroLine® 6000/7000/7500 KF/7500 KF trace/7750 and TITRONIC® 500
TZ 3864	285220710	Thermal paper for TZ 3863 with very high durability (5 rolls)
TZ 3865	285220440	DIN A4 standard printer, HP PCL-compatible, with USB-connection cable, 230 V