EBI 16 Alternative Bowie & Dick-Test

Electronic Bowie&Dick-Test with EBI 16 in accordance to ISO 11140-4.

The EBI 16 forms together with the evaluation software Winlog.med an easy to use and reliable electronic measurement system.

This allows implementing a comprehensive routine control of steam sterilizers by means of the alternative Bowie&Dick-Test according to EN 285 / DIN EN ISO 17665.

In addition to checking the penetration of steam, the relevant sterilization parameters are also checked. A vacuum test can also be carried out with this device.

The EBI 16 is designed to ensure the use of 1,000 cycles or 3 years without calibration or service.

Benefits :

Reliable: clear, reproducible measurement results
Accurate: high-resolution graphical cycle display
Secure: digital data recording and storage
Easy: to use and evaluate

Applications :

daily BD Test in the RUMED
patient safety

Electronic Bowie&Dick-Test with EBI 16 in accordance to ISO 11140-4.

The EBI 16 forms together with the evaluation software Winlog.med an easy to use and reliable electronic measurement system.

This allows implementing a comprehensive routine control of steam sterilizers by means of the alternative Bowie&Dick-Test according to EN 285 / DIN EN ISO 17665.

In addition to checking the penetration of steam, the relevant sterilization parameters are also checked. A vacuum test can also be carried out with this device.

The EBI 16 is designed to ensure the use of 1,000 cycles or 3 years without calibration or service.

Benefits :

Reliable: clear, reproducible measurement results
Accurate: high-resolution graphical cycle display
Secure: digital data recording and storage
Easy: to use and evaluate

Applications :

daily BD Test in the RUMED
patient safety

Technical Data of EBI 16

Specification Information
Data memory	6,960 measurement values
Weight	aprox, 500 g
Accuracy	± 0.1°C, ± 15 mbar
Protection class	IP68
Dimensions	90 mm x 150 mm
Resolution	0.01°C, 1 mbar
Certificate	Factory calibration certificate
Measured variables	Temperature, Pressure
Interval	1 s
Battery	Lithium battery (3,6 V), user replaceable
Measuring range	Temperature : 0 °C … +150 °C Pressure : 1 … 4.000 mbar
Storage temperature	-20 °C ... +70 °C

Software / Interface

Winlog.med Software

For routine controls

TÜV certified
User-friendly
High precision measurements
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for spezific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement
of the sensors directly on an application image possible
FDA 21 CFR Part 11

Winlog.validation Software for routine control and validation

Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.

The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.

The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.

TÜV certified
User-friendly – DIN EN ISO 9241-110:2008 conform
Central user administration in local area network possible
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for specific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible
FDA 21 CFR Part 11
DIN ISO/IEC 25051:2014
Incl. IQ- / OQ-Documentation for software Qualification
Automatic evaluation of validation processes