EBI 12-TP190 / TP290 Precision Pressure Logger for Measuring in H2O2 Sterilizer

High precision pressure measurement down to 0.1 mbar.

In the VH2O2 sterilizer, the generation of a fine vacuum is a prerequisite for the success of the sterilization process. For a routine check but also for measurement during validation, this data logger with its high accuracy is available.

The data logger must never be used in a steam sterilizer or otherwise exposed to an absolute pressure >2,000 mbar.

Benefits :

high accuracy
robust data logger
fast response time
Realtime data transmission

Applications :

Sterilization in H2O2 sterilizer

High precision pressure measurement down to 0.1 mbar.

The data logger must never be used in a steam sterilizer or otherwise exposed to an absolute pressure >2,000 mbar.

Benefits :

high accuracy
robust data logger
fast response time
Realtime data transmission

Applications :

Sterilization in H2O2 sterilizer

EBI 12-TP190

EBI 12-TP290

Technical Data of EBI 12-TP190 / TP290

Specification Information
Data memory	50,160 measurement values (TP190) 33,440 measurement values (TP290)
Weight	approx. 120 g
Accuracy	Pressure : 0.25 mbar (0.1 to 50 mbar) ±5 % of measured value (50 to 100mbar) 1 % FS (100 to 1050 mbar) Temperature (TP290) : ±0.1 °C (0 °C to +85 °C)
Protection class	IP68
Dimensions	ø 48 mm x 35 mm (TP190) ø 48 mm x 35 mm - Needle length 40 mm (TP290)
Resolution	Pressure : 0,1 mbar Temperature : 0,01°C (TP290)
Certificate	Factory Calibration: 0 °C and +60 °C
Measured variables	Pressure, Temperature (TP290)
Interval	250 ms ... 24 h
Battery	Lithium battery (3,6 V), user replaceable
Measuring range	Pressure : 0,1 mbar ... 1050 mbar Temperature : 0°C ... +85°C

Software / Interface

Winlog.pro Software

Enables real-time monitoring with wireless data loggers
Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc.
Display oft the timeline either absolute or relative
Customized definition of individual areas possible (with their
own statistics and calculations)
Including calibration tool for data loggers
Integration of pictures and graphics into reports possible
IQ/OQ documentation to qualify the system is available

Winlog.validation Software for routine control and validation

Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.

The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.

The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.

TÜV certified
User-friendly – DIN EN ISO 9241-110:2008 conform
Central user administration in local area network possible
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for specific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible
FDA 21 CFR Part 11
DIN ISO/IEC 25051:2014
Incl. IQ- / OQ-Documentation for software Qualification
Automatic evaluation of validation processes