EBI 12-T430 / T431 / T432 / T433 Temperature Data Logger for Food Validation

Data logger for food validation to measure inside the can and the outside as well.

The data logger is used for measurement during validation of food manufacturing processes.

The central axial sensor measures the temperature inside the canner. The lateral sensor measures the temperature outside the canner.

The data obtained can be used to draw conclusions about the temperature exposure time.

Benefits :

large measuring range
wireless measurement
Easy to fix
high accuracy
robust data logger

Applications :

Food Safety
Pasteurization Control
PU value determination
Determination of the temperature exposure time
F0 Value calculation

Data logger for food validation to measure inside the can and the outside as well.

The data logger is used for measurement during validation of food manufacturing processes.

The central axial sensor measures the temperature inside the canner. The lateral sensor measures the temperature outside the canner.

The data obtained can be used to draw conclusions about the temperature exposure time.

Benefits :

large measuring range
wireless measurement
Easy to fix
high accuracy
robust data logger

Applications :

Food Safety
Pasteurization Control
PU value determination
Determination of the temperature exposure time
F0 Value calculation

Technical Data of EBI 12-T430 / T431 / T432 / T433

Specification Information
Data memory	2 x 13,920 measurement values
Sensor	Pt 1000, class A
Weight	approx. 110 g
Accuracy	± 0,5 °C (-55 °C ... -40 °C), ± 0,2 °C (-40 °C … 0 °C), ± 0,1 °C (0 °C … +150 °C)
Protection class	IP68
Dimensions	(Ø x H) 48 mm x 24 mm - Needle length 50 mm (T430) (Ø x H) 48 mm x 24 mm- Needle length 75 mm (T431) (Ø x H) 48 mm x 24 mm - Needle length 100 mm (T432) (Ø x H) 48 mm x 24 mm - Needle length 150 mm (T433)
Resolution	0,01 °C
Certificate	Factory Calibration: -20 °C, 0 °C, +60 °C and +134 °C
Measured variables	Temperature
Interval	1 s ... 24 h
Battery	Lithium battery (3,6 V), user replaceable
Measuring range	-55 °C … +150 °C
Storage temperature	-20 °C ... +70 °C

Software / Interface

Winlog.pro Software

Enables real-time monitoring with wireless data loggers
Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc.
Display oft the timeline either absolute or relative
Customized definition of individual areas possible (with their
own statistics and calculations)
Including calibration tool for data loggers
Integration of pictures and graphics into reports possible
IQ/OQ documentation to qualify the system is available

Winlog.validation Software for routine control and validation

Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.

The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.

The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.

TÜV certified
User-friendly – DIN EN ISO 9241-110:2008 conform
Central user administration in local area network possible
Automatic report generation
Automatic user-defined calculations
Automatic identification of process cycles
Creation of user-defined masters for specific devices and
thermal processes
Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible
FDA 21 CFR Part 11
DIN ISO/IEC 25051:2014
Incl. IQ- / OQ-Documentation for software Qualification
Automatic evaluation of validation processes