EBI 12-TP226 Temperature / Pressure Data Logger for Measuring The Steam Sterilizer Outlet
Bendable probe for placement in steam sterilizer drain.
Validation logger for thermal testing of processes with steam sterilizers. The logger is characterized by its bendable metal probes. The very thin temperature sensors with a diameter of 1.5 mm at the sensor tip enable a very fast response time.
The data logger is often used for temperature measurement in the sterilizer drain with simultaneous pressure measurement.
Benefits :
- bendable metal probe
- high accuracy
- Realtime data transmission
- fast response time
- sterilizable data logger
Applications :
- Validation logger for Measurement in the steam sterilizer, washer disinfector and endoscope washer
- Measurement in the drain of the steam sterilizer.
Bendable probe for placement in steam sterilizer drain.
Validation logger for thermal testing of processes with steam sterilizers. The logger is characterized by its bendable metal probes. The very thin temperature sensors with a diameter of 1.5 mm at the sensor tip enable a very fast response time.
The data logger is often used for temperature measurement in the sterilizer drain with simultaneous pressure measurement.
Benefits :
- bendable metal probe
- high accuracy
- Realtime data transmission
- fast response time
- sterilizable data logger
Applications :
- Validation logger for Measurement in the steam sterilizer, washer disinfector and endoscope washer
- Measurement in the drain of the steam sterilizer.
Technical Data of EBI 12-TP226
| Specification Information | |
|---|---|
|
Data memory |
2 x 33,440 measurement values |
|
Weight |
approx. 120 g |
|
Accuracy |
Temperature : Pressure : |
|
Protection class |
IP68 |
|
Dimensions |
ø 48 mm x 32 mm - Needle length 250 mm |
|
Resolution |
0,01 °C |
|
Certificate |
Factory Calibration: |
|
Measured variables |
Temperature, Pressure |
|
Interval |
250 ms ... 24 h |
|
Battery |
Lithium battery (3,6 V), user replaceable |
|
Measuring range |
Temperature : |
|
Storage temperature |
-20 °C ... +70 °C |
Software / Interface
Winlog.pro Software
- Enables real-time monitoring with wireless data loggers
- Formula editor for calculating the F0-value of the absolute humidity,
the PE value etc. - Display oft the timeline either absolute or relative
- Customized definition of individual areas possible (with their
own statistics and calculations) - Including calibration tool for data loggers
- Integration of pictures and graphics into reports possible
- IQ/OQ documentation to qualify the system is available
Winlog.validation Software for routine control and validation
Save time and effort for the regularly required process validation with the help of the powerful reporting and evaluation software Winlog.validation.
The automatic recognition of the individual process steps makes your work easier and meets the high demands of validation and qualification in pharmacy and medicine.
The TÜV-certified evaluation software Winlog.validation enables you to carry out automatic and manual evaluations of the processes. You can adapt it to your needs at any time with individual process parameters and test criteria.
- TÜV certified
- User-friendly – DIN EN ISO 9241-110:2008 conform
- Central user administration in local area network possible
- Automatic report generation
- Automatic user-defined calculations
- Automatic identification of process cycles
- Creation of user-defined masters for specific devices and
thermal processes - Three-dimensional demonstration of sensor placement or placement of
the sensors directly on an application image possible - FDA 21 CFR Part 11
- DIN ISO/IEC 25051:2014
- Incl. IQ- / OQ-Documentation for software Qualification
- Automatic evaluation of validation processes
Interface Set SI 1300
- USB-connector
- Colored LED signals programming,
readout and faulty execution - Including Antenna AL 111
- Software Winlog.pro
Interface Set SI 1100
- USB-connector
- Colored LED signals programming,
readout and faulty execution - Software Winlog.pro
Accessories
AL 112 for IF 200 Steri-Antenne
- Developed for real time monitoring
- AL 112 is a cable with 3 m length
- Antenna placement in the field of the door seal of a sterilizer or washer disinfector
- Antenna steam-tight
- It is possible by a sealing to introduce it in the chamber
Video Information
More Information
Get more information and English manual for this Temperature Data Logger here!
